ABB Compact Control Builder AC800M

This document contains information about one or more ABB products and may include a

description of or a reference to one or more standards that may be generally relevant to

the ABB products. The presence of any such description of a standard or reference to a

standard is not a representation that all of the ABB products referenced in this document

support all of the features of the described or referenced standard. In order to determine

the specific features supported by a particular ABB product, the reader should consult the

product specifications for the particular ABB product.

This Product Guide is intended for sales representatives to provide information on

Compact Control Builder AC 800M and OPC Server for AC 800M.

Engineering Environment

• Diagram Editor with Function Diagram - Diagram is a new graphical language

that graphically interconnects functions, function blocks, control modules and

embedded ST and SFC code blocks on the same page.

• Search and Navigation - Communication variable references from other

projects within the same system do now appear as references, if the projects are

downloaded.

• Task Analysis Tool - The task analysis tool in Control Builder has been made

more easy to use. The meaning of the different messages is now more precise.

Time stamps have been added to the warning and error messages in the

summery view of the Task Analysis tool, this makes it easier to relate between

the messages and the graph.

• Display of Unit Specific System Alarm and Event Generation - There is a new

menu entry in Control Builder on hardware types called Unit Specific System

Alarm and Events. It brings up a new user interface that shows what system

alarms and events a unit can generate. The information is shown in Control

Builder rather than being printed in a user manual.

• Heap Utilization Dialog Available in Online Mode - The controller heap

utilization dialog in Control Builder is now available also in online mode.

• Additional Caution Dialog at Download with Init Restart - An additional

caution dialog is shown before download of changes in case the user or the

system suggested an init restart (i.e. loss of all cold retained values).

• Compiler Warning in case Data Type used for IAC has been changed

If the user changes a structured data type used for communication variables,

then the receiving controller will get ISP until both server and client have been

downloaded to. With this new version, the user gets to know in advance in case

a download of changes includes changed data types that will cause ISP on any

communication variable.

Control and I/O

• CI873 EtherNet/IP

The CI873 EtherNet/IP has been improved. It now supports master redundancy

by using two CI873s. The redundancy does not require the slaves to have the

EtherNet/IP redundancy connection method implemented. There is now also

support for native EtherNet/IP devices. CI873 supports logical segment Class 1

connection for reading and writing data to EtherNet/IP devices, and it

originates Class1 for tag reading and Class 3 for tag writing to Allen Bradley

Logix 5000 series PLCs.

• CI868 Enhancements

– IEC 61850 Wizard Tool improvements

– IEC 61850 MMS Client functionality for CI868 Module

• Self-defined UDP and TCP Communication

The new UDPCommLib and TCPCommLib contains function block types that

are used for self-defined UDP and TCP communication. These function blocks

are used when the controller needs to communicate with external equipment.

The used protocol is UDP and TCP, running on Ethernet. The function is

similar to the already existing self-defined serial communication, but on

Ethernet. It uses the inbuilt CN1 and CN2 on the PM8xx CPU. Redundancy is

handled by RNRP.

• Support for DI818, DO818, DI828, DO828

This version supports four new S800 I/O modules on modulebus and

PROFIBUS via CI801/CI840.

– DI818 - 32 channel digital input for 24VDC

– DO818 - 32 channel digital output for 24VDC

– DI828 - 16 channel digital input for High Voltage AC/DC

– DO828 -16 channel relay output for High Voltage AC/DC

• More memory with PM851A, PM856A, PM860A - These renewed CPUs have

with this version more available memory:

– PM851A - Now 12 Mbyte total RAM

– PM856A and PM860A - Now 16 Mbyte total RAM

• Backup Media in PM891- Memory cards larger than 2GB can now be used in

PM891, by the introduction of support for SDHC and SDXC cards formatted as

FAT32.

• Enhanced Integration of ABB Devices - This version brings new ways of

integrating ABB Drives and Motor Starters into AC 800M.

– Support for ABB standard drive ACS880 with FENA-11 and PROFINE

The new hardware library - ABBDrvFenaCI871HwLib - provides

PROFINET connectivity to the ACS880 drive via the communication

adapter FENA-11.

– Support for ABB standard drives with FPBA-01 and PROFIBUS

The new hardware library - ABBDrvFpbaCI854HwLib - provides

PROFIBUS connectivity to ABB drives via the communication adapter

FPBA-01.

– New motor starters for MNS iS on PROFINET

The MNS iS hardware library - ABBMNSiSCI871HwLib - offers support

for the two new motor starter types - Sace Circuit Breakers (Sace CBR)

and DC Feeder (DC MFeed).

• Improved Analog Control

– External Reset Feedback - The PidCC and PidAdvancedCC control

modules have a new mode called External Reset Feedback. The controller

follows an auxiliary value in this mode.

– Disable PD part - It is now possible to disable the PD part at windup

situations in the PidCC and PidAdvancedCC control modules. This can be

useful if an override controller shall not take any action until its epsilon

changes sign.

61615-0-1200000

64711245C

70PR05B-ES

72395-4-0399123

751010R0815

83SR04C-E

83SR06B-E

969-54

A1835A 3BSE051306R1

ACS550-01-059A-4

ACU-01B

AFC094AE02

AFIN-01C

AI625

AI830A

AI845

AI880-1

AIM0016

AINT-02C

AINT-12C

AINT-14C

AM801F

AO610

AO810

AO810V2

AO810V2 3BSE038415R1

AO815

AO820

AO845

AO845A

AO845A-eA

APBU-44C

APOW-01C

ARC093AV1

ARCOL 0338

ARCOL 0339

ARCOL 0346

ASFC-01C

AX411/50001

AX670

BB510(DC5256)

BC25

BCU-01

BCU-12

C310/0020/STD

CAL16-11A

CB801

CDP312R

CI546

CI547

CI610

CI626

CI626V1

CI627A

CI810B 3BSE020520R1

CI840A

CI853K01

CI854AK01

CI855-1

CI857K01

CI858-1

CI858K01

CI858K01 3BSE018135R1

CI861

CI867K01

CI868K01-eA

CI871

CM10/200

CM572

CP435-T-ETH

CP-A RU

CPU0002

CR-M4LS

CS513

CSA463AE

CSA464AE

D-20-0-1102

D2D146-AA28-28

D674A905U01

DAI03

DAO01

DASA110

DCP10

DDI01

DDO01

DDO02

DI524

DI620

DI803

DI810

DI810 3BSE 008508R1

DI810 3BSE008508R1

DI814

DI821 3BSE008550R1

DI831

DIS0006

DLM01

DLM02

DO620

DO630

DO801

DO810

DO820

DO821 3BSE013250R1

DO880-1

DP820

DPW01

DSAB-01C

DSAI130

DSAI130D

DSAI133A