Foxboro I/A Series DCS Control Systems

Foxboro I/A Series DCS Control Systems

THE COMPETITIVE ADVANTAGE Invensys Operations Management offers premiere feedwater control systems using the Foxboro® I/A Series® Distributed Control System (DCS). Recent implementations have offered operation philosophy enhancements, improved startup and runtime performance and significant reduction of unplanned unit trip outages. 

These advanced control techniques allow for less operator required interaction, more time of automatic control - including during start-up and shut-down when most unit trips are caused - making the entire control system more capable of handling process upset conditions along with normal operation. 

BEFORE I/A SERIES AT THE OMAHA PUBLIC POWER DISTRICT Before the I/A Series DCS was installed on the feedwater controls at the Omaha Public Power District at Fort Calhoun Station, there were many operational

challenges. The controls were poorly tuned. Level perturbations were not uncommon during changes in power, with poor low level control. 

John Steinke, Senior Nuclear Design Engineer at the facility states that “Having splitrange 3-Element control on the bypass feed water valve as well as the main valve allowed for automated controls to handle the switchover from the bypass to the main valve. This reduced operator direct manual interaction, and thereby reduced operator challenges. We also rotate our Steam Generator Feedwater Pumps. The split range 3-element controls greatly reduce the perturbations associated with rotating those pumps. More precise tuning and control have maximized our unit’s capability factor (ability to produce electricity) while removing undue burden from the Licensed Operators who are operating the system. To date, we have not tripped based on the DCS or garnered extra down time.” 

There was a plant transient soon after the controls were installed in which the Hotwell Makeup Valve failed to open. The operators, by that time, overcame their instinct to place the feedwater system in manual, and instead let the controls take action. The feedwater DCS response was called “outstanding.” It would have been a much more stressful event for operations using the pre-DCS controls. There have been multiple similar incidents after which Operations commented that the unit would have tripped if the steam generator level control was not on the DCS.

Mr. Steinke also stated how the use of the DCS provided much more system and process information. They are able to use this type of data to ascertain process characteristics (valve and pump nonlinearities). The system then had the tools to compensate for these characteristics and provide a better response to control actions.

FEM100 Fieldbus Expansion Module
FBI100 Fieldbus Isolator/Filter
FBI200A Fieldbus Isolator/Filter
FBI200 Fieldbus Isolator/Filter
FBM201/b/c/d Analog Input (0 to 20 mA, 0 to 100 mV, 0 to 5 V, 0 to 10
FBM202 Thermocouple/mV Input Interface Module
FMB203/b/c Platinum/Nickel/Copper RTD Input Interface Module
FBM204, 0 to 20 mA I/O Interface Module
FBM206 Pulse Input Interface Module
FBM207/b/c Voltage Monitor/Contact Sense Input Interface Modules FBM208,
Redundant with Readback, 0 to 20 mA I/O Interface Module FBM211, 0 to 20 mA Input Interface Module
FBM212 Thermocouple/mV Differential Input Interface Module

FBM214b HART Communication Input Interface Module
FBM215 HART Communication Output Interface Module
FBM216b HART Communication Redundant Input Interface Module
FBM217 Discrete Input Interface Module
FBM218 HART Communication Redundant Output Interface Module
FBM219 Discrete I/O Interface Module
FBM222, Redundant PROFIBUS Communication Interface Module
FBM227, 0 to 10 V dc, Contact/dc I/O Interface Module
FBM228 FOUNDATION fieldbus Interface Module
FBM229 DeviceNet Communication Interface Module
FBM230 Field Device System Integrator Module
FBM231 Field Device System Integrator Module
FBM232 Field Device System Integrator Module, 10/100 Mbps Ethernet, FBM233 Field Device System Integrator Module, 10/100 Mbps Ethernet,
FBM237, 0 to 20 mA Output Interface Module (Redundant Ready)
FBM238, Digital 24DI/8DO Mixed Interface Module 0211
FBM239, Discrete 16DI/16DO Interface Module 0211
FBM240, Redundant with Readback, Discrete Output Interface Module FBM241/b/c/d Discrete I/O Interface Modules
FBM242, Externally Sourced, Discrete Output Interface Module
FBM244, 0 to 20 mA I/O Interface Module with HART Support
FBM245, 0 to 20 mA I/O Interface Module with HART Support
FBM247, Current/Voltage Analog/Digital/Pulse I/O Configurable Interface Module
FBM Migration Modules
PSS 21H-3A1 B3 DCS FBM for Migration of Honeywell Systems 0810
PSS 21H-3A1 B4 DCS FBM for Migration of Honeywell Systems with HART Capability 0309
PSS 21H-3A2 B3 DCS FBM for Migration of Fisher PROVOX Systems 0211
PSS 21H-3A3 B3 DCS FBM for Migration of Bailey Systems 0207
PSS 21H-3A4 B3 DCS FBM for Westinghouse Process Control WDPF I and II Systems 0109
PSS 21H-3A5 B3 DCS Fieldbus Modules for Siemens APACS+ Automation Systems 0807
PSS 21H-7Q1 B3 SPECTRUM Migration Integrators 0807
PSS 21H-7Q2 B3 SPECTRUM Migration Integrator Expert 0697
Industrial Workstation and Devices
PSS 21H-3E2 B4 Redundant Array of Independent Disks 0105
PSS 21H-4B1 B3 Hard Copy Devices 0609
PSS 21H-4B3 B4 Dot-Matrix Printer 80 0608
PSS 21H-4B4 B4 Color PCL3 Printer 0608
PSS 21H-4B5 B4 132-Column Color Dot-Matrix Printer 0608
PSS 21H-4B6 B4 Color PostScript Printer 0609
PSS 21H-4C2 B3 Time Synchronization Equipment 0608
PSS 21H-4D1 B3 Workstation Components 0910
PSS 21H-4D6 B4 20-Inch Workstation Display With/Without Touchscreen 0397