GE Fanuc Field Control® Distributed I/O and Control System

Field Control is a family of versatile, truly modular I/O products, suitable for use in a wide range of

control system architectures.

Field Control I/O Modules are small and rugged. They provide easily-configurable discrete and

analog I/O interfaces which may also include local intelligence for signal processing.

I/O Terminal Blocks provide universal field wiring terminals for two I/O modules, allowing I/O

module types to be mixed on the same I/O Terminal Block. The I/O Terminal block is mounted on

a DIN rail. The DIN rail, which is an integral part of the grounding system, must be mounted to a

panel.

As many as eight Field Control I/O modules (four I/O terminal blocks) can be connected to one

Bus Interface Unit. Together, they make up a Field Control “station” Bus Interface Units are

available for different types of busses, such as Genius, Profibus, and FIP.

The Bus Interface Unit provides the I/O scanning, diagnostics, and communications capabilities

needed to link the I/O modules to the control system. In addition, the Bus Interface Unit may

provide (and store) configurable characteristics for I/O modules, such as fault reporting, output

defaults, analog range selection, and analog scaling.

I/O Modules

Field Control I/O modules are small rugged components with sturdy aluminum housings.

Modules are approximately 3.25 inches (8.2 cm) high x 2 inches (5.25 cm) wide. They are 2.90

inches (7.3 cm) deep (not including the portion that extends into the I/O Terminal Block).

Both discrete and analog conventional input and output modules are available. In addition,

intelligent modules, which perform more advanced functions, are also available. Examples of

intelligent modules are the Micro Field Processor, the 16-point Grouped Analog Input module

(IC670ALG240), the Thermocouple Input module (IC670ALG630), and the RTD Input module

(IC670ALG620).

LEDs

I/O Module LEDs are easily visible through the transparent central portion of the label. All

modules have an LED that indicates the presence of module power. Discrete modules also have

individual circuit LEDs that show the on/off status of each input or output circuit.

I/O Terminal Blocks

I/O Terminal Blocks are generic wiring bases for Field Control I/O modules. They provide I/O

module mounting, backplane communications, and terminals for user connections.

Two I/O modules can be installed on an I/O Terminal Block. Modules screw onto the terminal

block for vibration resistance.

Bus Interface Unit, Genius IC670GBI002

Bus Interface Unit, FIP IC670FBI001

Bus Interface Unit, Profibus IC670BPI001

Bus Interface Unit, Interbus-S HE670IBU001

Micro Field Processor IC670MFP100

I/O Terminal Block with Barrier-style Terminals IC670CHS001

I/O Terminal Block with Box-style Terminals IC670CHS002

I/O Terminal Block with Wire-to-Board Connectors IC670CHS003

Thermocouple Terminal Block IC670CHS004

Auxiliary Terminal Block with Barrier-style Terminals IC670TBM001

Auxiliary Terminal Block with Box-style Terminals IC670TBM002

Input Module, 120 VAC, 8 Isolated Points IC670MDL233

Input Module, 120 VAC, 16 Grouped Points IC670MDL240

Input Module, 16 Points, 2 groups 240 VAC IC670MDL241

Input Module, 24 VDC, 16 Grouped Positive/Negative Points IC670MDL640

Input Module, 48 VDC, 16 Grouped Positive/Negative Points IC670MDL641

Input Module, 125 VDC, 16 Grouped Positive/Negative Points IC670MDL642

Input Module, 5/12 VDC 16 Point IC670MDL643

Input Module 12/24 VDC 16 Grouped Positive/Negative Fast Inputs IC670MDL644

Mixed Input/Output Module 24 VDC, 10 Inputs and 6 Outputs IC670MDD441

Input Simulator Module, Horner, 8 Points HE670ACC100

Input Module, 30-300 VDC, Horner HE670DIM300

Output Module, 8 Point 24VDC Electronic Short Circuit Protection IC670MDL730

Output Module, 12/24 VDC 0.5 Amp, 16 Grouped Positive Points IC670MDL740

Output Module, 5/12/24 VDC Negative Outputs IC670MDL742

Output Module, 16 Point 12-120 VAC 16 Point, 0.5 Amp IC670MDL330

Output Module, 120 VAC 2 Amp, 8 Isolated Points IC670MDL331

Relay Output Module, 2 Amp, 6 Form A Points and 2 Isolated Form C Points IC670MDL930

Relay Module, High Current 16 Points, Horner HE670RLY168

Output Module, 25 Amp, 125 VDC, Horner IC670DQM125

Analog Current Input Module, 8 Grouped Points IC670ALG230

Analog Input Module, 16-Point Grouped IC670ALG240

RTD Input Module IC670ALG620

Thermocouple Input Module IC670ALG630

Analog Input Module, Horner,+/-10 VDC, 0-10 VDC, 8 points HE670ADC810

Isolated Analog Input Module (Voltage), Horner HE670ADC830

Isolated Analog Input Module (Current), Horner HE670ADC840

Analog Current/Voltage Output Module, 4 Grouped Points IC670ALG320

Analog Current source Output Module, 8 Points IC670ALG330

Isolated Analog Voltage Output Module, 8 Points IC670ALG310

Isolated Analog Output Module (Voltage), Horner HE670DAC830

Isolated Analog Output Module (Current), Horner HE670DAC840

I/O Base Connection Cables, extra IC670CBL001

I/O Expansion Cable, 21-inch IC670CBL002

2 Meter Cable for Connector-style Terminal Block, connector on one end IC670CBL003

1 Meter Cable for Connector-style Terminal Block, connectors on both ends IC670CBL004

Mating Connectors for I/O Terminal Block IC670CHS003 IC670ACC003