PACSystemsTM RSTi-EP Controllers EPSCPE100 115 EPSACC001

PACSystemsTM RSTi-EP Controllers  EPSCPE100 115  EPSACC001

Small Footprint. Big Impact. Leverage the power and flexibility of PACSystems in smaller applications. RSTi-EP CPUs make it possible to incorporate the entire PACSystems programming suite in stand-alone applications or as auxiliary control in larger process applications that use RX3i. This simplifies training for operators and maintenance workers and streamlines application development and integration. RSTi-EP CPUs support real-time application status, remote diagnostics and: nDual LAN interfaces with four Ethernet ports nBuilt-in RS-232 serial port nA range of communications protocols, including PROFINET nAvailable DNP3 Outstation capability for Remote Terminal Unit (RTU) applications nUp to 1.5 MB of non-volatile user memory all in just 1.5” (38.1mm) of DIN rail space Speaking the Same Language With RSTi-EP CPUs you can use the same runtime as existing  RX3i controllers and leverage existing application libraries  and templates while scaling footprint and performance for smaller application installations. Fast, easy-to-configure PACSystems technology and an extensive range of I/O options support scalable automation and highly distributed modular machine designs. PROFINET Advantage PROFINET I/O solutions from Emerson can provide productivity and performance advantages for virtually any type of control application in a range of industries. PROFINET supports a variety of I/O without compromising system performance and can operate in high-noise environments. Connect to any of Emerson’s purpose-built I/O families through a PROFINET interface for advanced flexibility and performance. Advanced Security Without proper cybersecurity in place, industrial controls may be vulnerable to cyber threats. Emerson’s PAC, PLC and industrial automation portfolio enlists defense-indepth architecture to help secure assets from these threats. RSTi-EP CPUs  incorporate technologies such as Trusted Platform Modules and secure and trusted boot. Centralized configuration allows encrypted firmware updates to be executed from a secure central location. And, a suite of cybersecurity technology and tools help prevent unauthorized updates.

Form Factor nStandalone Retentive Memory n1MB (CPE100) n1.5MB (CPE115) I/O n2k Bits Discrete I/O n32k Words for Analog I/O Communications Interface n1 x RS-232 n1 x RS-485 nEthernet Port - 10/100- 3-port switch 10/100

Ethernet Communications nSRTP Client/Server nModbus TCP/IP nOPC-UA Server nEGD nPROFINET RT nDNP3 Outstation capability over Ethernet* 

Redundancy Support nMedia Redundancy Protocol (MRP) 

Environmental n-40°C to 70°C 

Power n9 VDC – 30 VDC input n250mA @ 24 VDC n6 W maximum dissipation 

Serial Communications n Modbus/RTU n Serial I/O 

Agency Approvals n UL n cUL n RoHS n FCC n REACH n WEEE n UL HazLoc Class 1Division 2 n ATEX Zone 2 

Marine n ABS n BV n DNV GL

The PACSystems* RSTi-EP EPSCPE100, is an enhanced performance standalone 1GHz programmable controller equipped with 1MB of user memory and four Ethernet ports to run real time deterministic control applications. LAN1 is dedicated to highspeed Ethernet and LAN2 comprised of 3 switched ports configurable as either an embedded Ethernet controller or an embedded PROFINET controller, which provides the PROFINET functionality and supports only simplex mode of operation. It is a standalone PLC that supports distributed I/O. From now on in rest of the document this controller will be referred to as CPE100.  The CPE100 is programmed and configured over Ethernet via GE’s Proficy Machine Edition (PME) software.  It can control/process up to 2K I/O points. Highlights include:  A built-in PACSystems RSTi-EP PLC CPU o User may program in Ladder Diagram, Structured Text, Function Block Diagram. o Contains 1Mbytes of configurable data and program memory. o Supports auto-located Symbolic Variables that can use any amount of user memory. o Reference table sizes include 2k bits for discrete %I and %Q and up to 2k words each for analog %AI and %AQ. Bulk memory (%W) also supported for data exchanges. o Supports up to 512 program blocks. Maximum block size is 128KB. Figure 1: EPSCPE100 Features at a Glance   Supports two independent 10/100 Ethernet LANs. LAN1 has only one port and is dedicated to highspeed Ethernet and whereas LAN2 comprises of 3 switched ports configurable as either an embedded Ethernet controller or an embedded