ABB Panel 800 PP865A 3BSE042236R2
The Panel 800 operator panel is developed to satisfy the demands of humanmachine communication. Built-in functions such as displaying and controlling text,
dynamic indication, time channels, alarm and recipe handling are included.
The operator panel work, for the most part, in an object-oriented way, making it
easy to understand and use. The configuration operation of the panel is made in a
personal computer, using the configuration tool Panel Builder 800. The project is
then transferred and stored in the operator panel.
The operator panel can be connected to many types of automation equipment, such
as PLCs, servos or drives. In this manual the expression “the controller“ is used as a
general term for the connected equipment.
This manual explains how to install the operator panel. Please refer to the manual
Panel Builder 800, Programming and Installation (3BSE043445Rxxx) for further
information.
The release history of the Panel 800 is presented below.
Technical Specifications
• Single chip USB to 10/100 Mbps Fast Ethernet.
• Compliant with USB specifications 1.0, 1.1, and 2.0.
• Full/High Speed USB Device with bus power capabilities.
• IEEE 802.3u 100BASE-T, TX, and T4 compatible.
• Embedded 7K*16 bit SRAM, 256*16 bit SRAM and 8 FIFOs.
• Supports both full-duplex or half-duplex operation Fast Ethernet.
• Supports suspended mode and remote wake up.
• Optional PHY power down mode for power savings.
• Supports automatic loading of Ethernet ID, USB Descriptors and Adapter
Configuration from EEPROM on power-on initialization.
• Ethernet PHY loop-back diagnostic capability.
Front panel, W x H x D 398 x 304 x 6 mm
Mounting depth 60 mm (160 mm including clearance
Front panel seal IP 66
Rear panel seal IP 20
Keyboard material/
Front panel
Touch screen: Polyester on glass, 1 million finger touch operations.
Overlay: Autotex F157/F207 *.
Reverse side material Powder-coated aluminum
Weight 3.7 kg
Serial port
RS422/RS485
25-pin D-sub contact, chassis-mounted female with
standard locking screws 4-40 UNC.
Serial port RS232C 9-pin D-sub contact, male with standard locking screws 4-40 UNC.
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500mA
Device type B (USB 1.1)
CF-slot Compact flash, type I and II
Flash memory for
application
12 MB (incl. fonts)
PP865
PP826
PP865A
PP836
PP846A
PP836A
PP846