IC693MDL640RR 24 Vdc Output, Positive Logic (16 Points)
IC693MDL640RR 24 Vdc Output, Positive Logic (16 Points)
IC693MDL640RR 24 Vdc Output, Positive Logic (16 Points)
IC693MDL641RR 24 Vdc Output, Negative Logic (16 Points)
IC693MDL643RR 24 Vdc Input, Positive Logic (16 Points)
IC693MDL644RR 24 Vdc Input, Negative Logic (16 Points)
The Series 90-30 I/O modules described in this manual can be controlled two ways:
1. With a Series 90-30 Programmable Logic Controller (PLC).
2. With a Personal Computer (PC) that has an installed Personal Computer Interface card (or
similar interface). This allows software on the PC to control and monitor Series 90-30 I/O.
If you are using Series 90-30 I/O as part of a Series 90-30 PLC system, you should refer to
GFK-0356, the Series 90-30 Programmable Controller Installation manual, for more information.
If you are using a Personal Computer to control the Series 90-30 I/O, refer to the documentation
for the PCIF, your Personal Computer, and your application software for more information.
In addition to Series 90-30 I/O modules, the I/O system supports a wide variety of option
modules, such as
Genius Communications and Bus Controller
Communications Control module (for serial communications)
Programmable Coprocessor Modules and Alphanumeric Display Coprocessor
Motion control and High Speed Counter modules
Ethernet interface,
Various bus controllers.
State Logic modules
-----------------------------
IC693ACC330 Base is discontiued. Use generic TBQC base IC693ACC329.
IC693ACC331 Base is discontiued. Use generic TBQC base IC693ACC329.
IC693ACC332 TBQC Base for IC693MDL940
IC693ACC333 TBQC Base for IC693MDL340
IC693ACC334 Faceplate provides a 24 pin fale Fujitsu connector for cable connection. Faceplate replaces I/O module terminal block (20 screw terminal connector).
IC693ACC335 Axis terminal block for the DSM302 or DSM314
IC693ACC336 Auxiliary terminal block for the DSM302 or DSM314 or DSM324 5V I/O
IC693ACC337 TBQC Base for IC693MDL654/655/752/753
IC693ACC338 CPU364 FACEPLATE KIT CONTAINS 5 EACH FRONT PLASTIC AND LABELS
IC693ACC341 Redundant Power Supply Base with 0.5 meter cable to connect to Power S upply Adapter module. Supports any Series 90-30 power supply.
IC693ACC350 Redundant Power Supply Adapter (RPSA) Module. The RPSA replaces the p ower supply on a CPU base or expansion base and connects to a Redundan t Power Supply Base.
IC693ACC400 Expanded battery backup for Series 90-30 CPUs. Quantity 1. 8.5 Amp hour battery for Series 90-30 CPU311, 313, 323 and CPU36x type only. Not compatible with Series 90-30 CPU37x CPUs. The battery mounts on power supply and extends the depth of the s
IC693ACC760 Solenoind Valve Module Forcing Pendent
IC693CBL313 I/O rack expansion cable, 8 Meters
IC693CBL316 Station Manager Serial Cable for Ethernet TCP/IP
IC693CBL319 I/O cable for DSM324 24V I/O or APM I/O to the 44A726268-001 terminal block. 1 meter
IC693CBL324 I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 1 meter
IC693CBL325 I/O cable for DSM302 or DSM314 or DSM324 5V I/O. 3 meters
IC693CBL327 Cable, Left Side, One - 24 Pin 90 Degree Connector, 3 Meter.
IC693CBL328 Cable, Right Side, One - 24 Pin 90 Degree Connector, 3 Meter
IC693CBL329 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL330 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL331 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL332 Cable, Right Side, Two - 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL333 Cable, Left Side, Two - 24 Pin 90 Degree Connectors, .5 Meter
IC693CBL334 Cable, Right Side,18144100983 Two - 24 Pin 90 Degree Connectors, .5 Meter
IC693CMM321CA Conformal Coated Ethernet Interface module. 10Mbits, supports SRTP and Modbus TCP Client/Server. The CMM321 no longer supports the AAUI/AUI interface. If the AAUI/AUI is required, please contact GE Global Customer Care.
IC693CMM321RR Ethernet Interface Module
IC693CPU311 5-Slot Base With CPU in base (6K Bytes User Program) Battery included
IC693CPU311CA Conformal Coated CPU311 5 slot base. CPU built into base.
IC693CPU311LT 5-Slot Base With CPU in base (6K Bytes User Program) (LT)
IC693CPU311RR Base 5 - slot with CPU311
IC693CPU313 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program) Battery included
IC693CPU313CA Conformal Coated CPU313 5 slot base. CPU built into base.
IC693CPU313LT 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program) (LT)
IC693CPU313RR 5-Slot Base With Turbo CPU (6 msec), 1K Registers
IC693CPU321RR 10-Slot Base With CPU (3K Words) & Manual
IC693CPU323 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program, Battery included
IC693CPU323CA Conformal Coated CPU323 10 slot base. CPU built into base.
IC693CPU323LT 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program (LT)
IC693CPU323RR 10-Slot Base With Turbo CPU (6 msec)
IC693CPU331 CPU 331 Module (16K Bytes), The battery for the CPU is now included in the CPU backplane box.
IC693CPU331LT CPU 331 Module (16K Bytes) (LT)
IC693CPU331RR CPU 331 Module, 8K Words, Manual
IC693CPU340RR CPU 340 Module, (16K Bytes user memory), 10K Reg., 3 msec/K
IC693CPU341RR CPU 341 Module, (80K Bytes user memory), 10K Reg., 3 msec/K
IC693CPU350 CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K, The battery for the CPU is now included in the CPU backplane box.
IC693CPU350CA Conformal Coated CPU350, 32Kbytes of memory
IC693CPU350LT CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K (LT)
IC693CPU350RR CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in S erial Ports .22msec/K
IC693CPU351RR CPU 351 Module (4K I/O, 8 Racks)
IC693CPU352RR CPU 352 Module (4K I/O, 8 Racks, Floating Point Math)
IC693CPU360 CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K, The battery for the CPU is now i ncluded in the CPU backplane box.
IC693CPU360CA Series 90-30 CPU360 with Conformal Coated.
IC693CPU360LT CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K (LT)
IC693CPU360RR CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 racks), no built-in Serial Ports
Delivery:
Warranty:
All our products are covered by our own warranty.
Payment method:
Quick Quote: Receive price and availability today!
Replacing an electrical equipment unit in a plant is a complex task that requires careful planning and execution to ensure safety and minimize downtime. Here is a general step-by-step guide on how to replace electrical equipment in a plant:
Pre-Planning:
Safety Precautions:
Shutdown Procedures:
Disconnection:
Removal of Existing Equipment:
Installation of New Equipment:
Testing and Commissioning:
Documentation:
Training:
Startup:
Throughout the process, it’s important to work closely with a team that includes electrical engineers, technicians, and maintenance staff. Communication is key to a successful equipment replacement. Additionally, always adhere to local electrical codes and standards to ensure compliance and safety. If the task is beyond the expertise of in-house staff, consider hiring a professional contractor experienced in industrial electrical work.
Obtaining industrial automation programming software typically involves the following steps:
Identify Your Needs:
Research Software Options:
Contact Equipment Manufacturers:
Purchase or Download:
Academic or Evaluation Versions:
Open Source Options:
Licensing:
Training and Support:
Legal and Compliance:
Installation and Setup:
Here are some common ways to obtain industrial automation programming software:
Remember to keep your software updated to benefit from the latest features and security patches. Also, ensure that you have the necessary backup and recovery procedures in place to protect your programming work.
Region Email:
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2024 Copyrighted
Phone(WeChat)
+086-18144100983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,