ABB 3HAC5497-1
Important
All control parameters are determined in an optimum way for most actuators during Autoadjust.
Changes should only be made when Autoadjust cannot be executed or control stability cannot be achieved.
The KP value is the gain of the controller. The control speed and stability are influenced by the KP value. With higher KP values, the controlling speed increases.
Important
The control precision is not affected by the KP value.
To compensate for existing dissymmetries in the controlled system, the KP value should be set separately for both directions (up / down).
For most actuators, a satisfactory control response is achieved with a KP value in the 2.0 ... 10.0 range.
You can use parameter KP UP to adjust the KP value for the positioning direction up (towards 100 %).
3BSE089152R0059
Expand from 20,000 to 30,000 OPC Points
3BSE089152R0061
Add AE License, OPC Server MOD 300 1.4
3BSE091972R1
CS513AK02 eDCN RJ-45 Comm Interface
3BUA001033R100
OCS Evolution Library for AC800M Demo Li
3BUC910018R1
RX506 Bracket, T-Box Mounting
3BUC910033R1
Plate,AC Main mounting
3BUC950052R15
TK830V115 RJ45 FTP CAT6 patch red 15m
3BUC950052R3
TK830V030 RJ45 FTP CAT6 patch red 3m
3BUC950053R15
TK831V115 RJ45 FTP CAT6 patch green 15m
3BUC950053R3
TK831V030 RJ45 FTP CAT6 patch green 3m
3BUC980002R1
CI560 TRIO Interface Submodule, MOD 300
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2025 Copyrighted
Phone(WeChat/Whatsapp)
+086-181 4410 0983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,