ABB 5SHY35L4510
Important
You can only load the factory settings when the actuator is in the safe position (parameter FAIL_POS). Otherwise, the action is inhibited and the message NO_F_POS is indicated in the display.
If you save the settings in the non-volatile memory after loading the factory settings, operating mode 1.3 is automatically activated on the operating level.
To load the factory settings:
Press and hold ENTER until the displayed countdown from 3 to 0 is finished.
The positioner is reset to the factory settings. The message COMPLETE is displayed.
Press ENTER to acknowledge the message.
Selection:
FS_LOAD Loads the factory settings
3HNA000512-001
3HNA023093-001
3HNE 00313-1 TILLV.0317
408368B IAM MODULE
44.1*22.7*4.4
4944026-004
5360673-01
57160001-KX
5SDD1060F0001
5SDF0860H0003
5SGX1060H0003
5SGX1445H0001
5SGY3545L0017
5SGY35L4510
5SHX0660F0001
5SHX06F6004
5SHX1445H0001
5SHX14H4502
5SHX2645L0004
5SHY3545L0003
5SHY3545L0005
5SHY3545L0009
5SHY3545L0014
5SHY3545L0020
5SHY35L4510
5SHY35L4520
5SHY4045L0004
5SHY4045L0006
5STB-24Q2800
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2025 Copyrighted
Phone(WeChat/Whatsapp)
+086-181 4410 0983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,