8VZZ000035L325 ABB H&B Contronic
setting parameter
● Termination 9 pole D connector
(female)
– on the plug-in base ECZ use 60 °C copper conductor only Cross section :
– bus wiring terminal : twisted pair
AWG 24 (0.22 mm2) to AWG 18 (0.8 mm2)
– earth terminal : rigid or stranded connectorAWG 10 (5.2 mm2) – Others terminals :
● inputs : stranded connector
AWG 18 (0.8 mm2) to AWG 14 (2.1 mm2)
● outputs : stranded connectorAWG 14 (2.1 mm2)
● power supply
AWG 14 (2.1 mm2)
– on removable terminal block (small section) 2.5 mm2 (copper N° AWG14)
– on removable terminal block (small section) 1.5 mm2 (copper N° AWG16)
– screws tightening
torque (for guidance only)
● Supply connections 7 ibs. inch (0.8 Nm)
– 24 VDC (process and 24 VDC
power supply (-20 %, +25 %, i.e. 19.2 ... 30V)
incl. ripple
ripple factor < 5 %
– 120 VAC power supply 120 VAC
(-15%, +10%, i.e. 102 ... 132V)
50 Hz or 60 Hz (± 5 %)
– 230 VAC power supply 230 VAC
(-15%, +10%, i.e. 195.5 ... 253V)
50 Hz or 60 Hz (± 5 %)
● Voltage drops and interruptions
– DC power supply interruption time ≤ 10 ms time interval between two drops ≥ 1s
– AC power supply interruption time ≤ 0.5 period
time interval between two drops ≥ 1s
M2004HW
MB510
MP3-11W
MSR04X1
MSR04XI
MVR 0.44-10KA
NAIO-03
NCNA-01
NDBU-95C
NKST11-15
NPBA-12
NPCT-01C
NTAC-02
NU8976A
NU8976A99
PCC322BE
PCD230A
PCD231B
PCD235A101
PCD244A101
PDD200A101
PDD205A0121
PDD500A101
PE1315A
PFCL201C 20KN
All new products and surplus products of the industrial intelligence industry, as well as the discontinued products of the original manufacturers. We are not an authorized distributor or representative of any of the above manufacturers (except for brand authorization). The trademarks, brand names and brands appearing in this agreement are the property of their respective manufacturers.
COPYRIGHT© 2003-2025 Copyrighted
Phone(WeChat/Whatsapp)
+086-181 4410 0983
No 1134 Jimei North Road, Jimei District
Hong Kong Office:
Guan Tang District, Hong Kong,