Bently Nevada 60M100 Condition Monitoring System
The 60M100 -00Condition Monitoring System continuously monitors wind turbine machine trains using sophisticated signal processing algorithms and machine operating states. The 60M100 Monitoring System, as a part of condition-based maintenance, detects defects months in advance of a potential failure.
Depending on the size of your wind farm, early detection can reduce outages and production loss, saving you hundreds of thousands to millions of dollars per year in lost revenue. With the advanced knowledge provided by the 60M100, you can schedule maintenance outages and crane operations in advance, reducing maintenance costs.
The 60M100 Monitor can be used in several configurations:
l
As an independent, standalone condition monitoring system.
l
A networked, distributed collection of inter-operating systems. l
As an integrated part of a machine OEM's control and instrumentation package.
The 60M100 monitor includes features and advantages not provided in other systems. The monitor systems have all functionality required for condition monitoring of wind turbine machine trains including signal conditioning, alarming, configuration, speed inputs, and control system communication.
The system components include: 60M100 Monitor, Adapt.wind software, Transducers and cables.
Sophisticated signal processing algorithms extract dozens of measurements and health indices from each accelerometer point and can be custom tuned to specific bearing and gear box characteristics.
Electrical
Input Power
Min: 18 Vdc Max: 36 Vdc
Current
Max: 1.7 A
Inrush Current
Max: 2.7 A, less than 5 ms
Module
Inputs
Max: 12 dynamic signals and 2 Keyphasor signals
Dynamic Range
110 dB @ fs = 102.4 ksps
Signal/Noise Ratio
110 dB @ fs = 102.4 ksps
A/D Conversion
Sigma-Delta 24 bits nominal
Bandwidth
0 to 40 kHz
Outputs
Two Independent Ethernet ports
Net A: 10/100 BaseT Network DHCP Port Net B: 10/100 BaseT Local Static IP Port
Buffered Signal Outputs
Two 15 pin DSUB connector 550 ohm output impedance
