Bently 3701/55 ADAPT Emergency Shutdown Device

Bently 3701/55 ADAPT Emergency Shutdown Device

Description

The 3701/55 Emergency Shutdown Device, (ADAPT ESD) is a safety PLC with a graphical logic programming interface and integrated overspeed detection. ADAPT ESD is designed for emergency shutdown of rotating machinery such as steam, gas, and hydro turbines, expanders, and other process equipment.

ADAPT ESD is a compact, standalone, triple-redundant, safety shutdown device that is designed to meet a broad range of user scenarios and applications. The design offers an electrical and mechanical package with attention to reliability and availability as well as extensive self-diagnostics and compliance to industry standards.

Inputs

Inputs to the system are processed using three CPU modules to provide triple modular redundancy (TMR). Each CPU processing module processes two unique speed input channels, for a total of six speed channels for the system. The processing modules also monitor an array of 32 discrete (DI) and process variable (PV) signal inputs. Twelve channels of this input signal array may be configured either as discrete inputs or 4-20 mA analog inputs. Remaining channels in the array are reserved for discrete input signals only.

Outputs

Machinery shutdown functionality of the 3701/55 ADAPT ESD system is actuated by TMR relay output modules. Each relay output module has five relays with a level of configurability that accommodates a variety of applications and requirements. Four of the five relays in each module are used to annunciate system logic. The remaining relay reflects the OK/NOTOK status of the associated protection path. The Bently Nevada Monitor Configuration software provides a graphical interface to configure relay logic. The state of each relay is determined by the system inputs and configured system logic in conjunction with the control state of the relay. Relay control states depend on the application, and may be set as normally energized/de-energized and independent one-out-of-one, (1oo1), voting or TMR two-out-of-three, (2oo3), voting. Each CPU module in the system has two, internally powered, 4-20 mA recorder outputs controlled by the full-scale speed set by the user through the Monitor Configuration software.

Compliance

The 3701/55 ESD complies with most applicable technical regulations and standards.

l

North American general safety, CSA certified

l

CE, Low Voltage and Electro-Magnetic Compatibility

l

Functional Safety certification (SIL)

l

CE, Machinery Directive

l

North American, Hazardous Area certification, CSA certified

l

European ATEX and IECEx Hazardous Area certification pending

Transducer Power Supply Typical

-24Vdc (-23.5Vdc to -24.75Vdc over operating range)

4-20 mA Recorder Output Specifications

289761-01

ADAPT ESD Terminal Base Assembly

323174-01

ADAPT ESD CPU Module

323073-01

ADAPT ESD 4 Ch. Relay Output Module

323073-02

ADAPT ESD 4 Ch. Gold-plated Relay Output Module

289036-01

Spare ADAPT ESD Terminal Block

324343

ADAPT ESD Weatherproof Enclosure

103M1345-01

3701/55 ADAPT ESD Configuration Software DVD

Please download this software